Teflon tape storage, use and maintenance

Teflon tape should be stored in the warehouse, to avoid sun and rain. Prohibition of acid-base oil organic solvent contact, keep clean and dry, 1m away from the discovery device, room temperature between -15 ℃ ~ 40 ℃.

Teflon tape should be placed in rolls, not folded. If the storage time is too long, it should be flipped quarterly.

It is best to use cranes when loading and unloading conveyor belt, and with beam of rigging to lift up smoothly, avoid damaging the edges. Do not barbaric loading and unloading, causing loose rejection thrum.

According to the needs of use and specific conditions to reasonable choose Teflon tape types and specifications.

Different varieties, specifications, strength, the number of layers of tapes can’t be connected (with group) together.

It is better to use heat vulcanized adhesive for conveyor belt connector to improve reliability, maintain high effective strength.

Conveyor roller diameter and conveyor belt minimum pulley diameter should comply with the relevant provisions.

Do not make the tape snake or creep, to keep the roller, vertical roller flexible, tension should be moderate.

If the Conveyor equipped with baffle and cleaning device, wear and tear on the tape should be avoided.

Cleanliness is the basic condition for good tape operation. Other substances will affect the tape off center, tension differences, and even rupture.

If any damage found in the use of Teflon tape, we should promptly find the cause and repair, to avoid the emergence of any adverse consequences.